Create a dynamic effect with this Heavy 26 45°. Due to the fact that the frame extends slightly outwards, it lets the print float, as it were, and you create a 3D effect. A perfect solution for displaying prints in an office, showroom or shop. But also extremely suitable for the interior.
With the Heavy 26 45° profile you can easily turn around the corner in a room, so that the profile can be used as a carre profile. You get a blind corner, where only the edge of the aluminium is visible.
The frame can be used in combination with acoustic material. This ensures better acoustics and less reverberation in any desired room. Therm Acoustic is 100% recyclable and is made of polyester fibers, of which 60% comes from recycling (PET bottles).
To ensure the stability of large-format frames, stabilizers are mounted in the frame above 2.2 metres, which act as internal support beams. The frame can be attached to the wall by using wallmounts with a levelling screw. This makes it easy to level the frame. In addition, the frame can be attached, depending on its size, by screwing it to the wall approximately every 150 cm.
The silicone tendon of the Heavy 26 45° fits into the profile at a 45-degree angle. Therefore, we recommend a correction of 4 mm per side.
The Heavy 26 45° comes standard in silver, white and black. Do you prefer a different colour? Enter your desired RAL colour code, and we will powder-coat the profile in the colour of your choice.
|Item number||NF-04070-45G (silver), NF-21070-45G (black) and NF-56070-45G (white)|
|Depth (mm)||26 mm|
|Frame type||Single-sided textile frame|
|Open / closed finish||Closed|
|Bar length||6150 mm|
|Acoustic material||Therm Acoustic 25 mm|