Carre 44

Freestanding and suspended

You can create striking frames with these modular 3D profiles. The textile print is visible from multiple sides and perfect for both freestanding and suspended use. Additionally, the construction is ideal for creating complete exhibition stands.

Combination with the Double 44

Together with the Double 44, the possibilities are endless. The Carre 44 is used as a vertical corner component, and the Double 44 profile connects to it seamlessly. The outer groove of a Double 44 makes it easy to attach accessories. The Double 44 is also available in a sleek finish, the Double 44 closed. Open and closed can be combined. It can also be combined with a curved Double 44 profile, allowing you to build even more spectacular constructions. By using stabilizers, any size is possible. We recommend using stabilizers for profiles exceeding 2200 mm.

L-configuration

The L-shaped formation is a basic configuration for freestanding exhibition stands and partition walls. It is possible to suspend the L-shape to create a spectacular banner. This configuration consists of two double-sided partitions with the Double 44 profile attached to one vertical Carre 44 profile. The fabrics for the inner side of the Carre 44 require a correction of -44 mm on the width of the fabric (in relation to the outer size of the frame).

U-configuration

The U-shaped formation is a more extensive configuration for exhibition stands, partitions and freestanding use. It is also possible to suspend the U-shape to create a spectacular banner. This configuration consists of three double-sided walls, made with the Double 44 profiel attached to two vertical Carre profiles. The fabrics for the inner side of the Carre 44 require a correction of -44 mm on the width of the fabric at both ends and -88 mm on the width of the inner fabric (in relation to the outer size of the frame).

O-configuration

The O-shaped formation is a complete freestanding configuration that can be used for example as storage space or to create a separate meeting area on the exhibition floor. It is also possible to suspend the O-shape and create an impressive banner above your exhibition stand. This configuration consists of four double-sided walls, made with the Double 44 profile attached to four vertical Carre profiles. The fabrics for the inner side of the Carre 44 require a correction of -88 mm on the width of the fabric (in relation to the outer size of the frame).

Seamless connection in the corners

The textile print connects seamlessly to the corners of the configuration for a perfectly sleek design. Fabric can be fitted to both the inside and the outside of the frame, making the frame almost invisible.

In every desired colour

The Carre 44 profile is standardly available in brute aluminium, commonly known as untreated aluminium. Does your customer prefer a different colour? Enter your desired RAL colour code and we will powder coat the profile in the colour of your choice.

Alternative: Carre 80

The Carre 44 is safe to use up to a height of 2300 mm. The width has no restrictions. Do you need a 3D frame with higher dimensions? Then opt for the Carre 80, as it is an even thicker and sturdier profile. The Carre 80 is standard available in silver (anodised), black and white.