Outdoor Lightbox 80

Perfect illumination of the banner

The Outdoor Lightbox 80 frame is backlit with waterproof and energy-efficient LEDs pre-mounted on a Dibond plate. This ensures that the light is distributed evenly. The frame can be mounted easily on a flat surface and has a 80-mm depth. 

Changing the banner easily and quickly

The Outdoor Lightbox 80 profile requires a non-stretch backlit PVC banner with silicone strip. The banner is tensioned into the frame with an internal tilt profile. The frame has an adjusting screw every 60 cm to tension the banner. After tensioning, the silicone strip is completely locked in place. This simple system allows you to change your sign quickly and easily. It means the illuminated frame can simply remain hanging on the wall.

Storm-proof and sturdy system

The banner is completely enclosed after tensioning, making it storm-proof. The Outdoor Lightbox 80 is designed to withstand winds up to wind force 12. The frame is maintenance-free and suitable for years of intensive use. The frame is almost invisible, making your sign stand out more and thus making it more effective.

Suitable for large banner surfaces

The maximum dimension of the Outdoor Lightbox 80 is 12 x 3 metres, consisting of two connectable parts. The frame has a banner tolerance of 3 mm. It is also important that the silicone strip is fastened correctly to be able to tension the banner evenly.

Holes for water drainage

It is a legal requirement to drill drainage holes in an illuminated frame. To do this, drill two holes of at least 7 mm on the left and right-hand sides of the lower profile. For frames beyond two metres, we recommend drilling several drainage holes.

Alternative: Outdoor Lightbox 80 Acrylic

The Outdoor Lightbox 80 Acrylic profile is an illuminated alternative, whereby an acrylic plate is illuminated from the rear. This frame can be ordered with an optional twilight switch..